
A $50Hz$AC current of crest value of $1A$ flows through the primary coil of a transformer. If the mutual inductance between the primary and the secondary coil be $0.5H$, the crest voltage induced in the secondary is:
A. $75V$
B. $150V$
C. $100V$
D. None of these
Answer
148.2k+ views
Hint First calculate the time period of the AC current from the frequency given. Then using electromagnetic theory of induction derive the formula for voltage induced in the secondary. Substituting suitable values in this equation determines the answer.
Formulas used
$t = \dfrac{1}{f}$ where $t$ is the time period and $f$ is the frequency of the waveform.
${V_2} = M\dfrac{{d{i_1}}}{{dt}}$ where $M$is the mutual inductance, $d{i_1}$ is the change in current and $dt$ is the time difference.
Complete step by step answer
A transformer is an electrical device which can transfer electrical energy from one circuit to another. It usually consists of two windings with mutual inductance. One of the windings is called the primary while the other is called secondary. AC source is connected to the primary and a load to the secondary. The transformer can step up or step down the generator voltage.
The frequency of the given current is $50Hz$ so its time period is given by,
$t = \dfrac{1}{f} = \dfrac{1}{{50}}$$s$
In a transistor, the source can deliver power to the load via the magnetic coupling between the windings.
So, by formula,
${V_2} = M\dfrac{{d{i_1}}}{{dt}}$ where $M$is the mutual inductance, $d{i_1}$ is the change in current and $dt$ is the time difference.
We use this formula because a voltage is induced in the secondary coils of the transformer due to the change in current in the primary.
Now, the crest current is given as $1A$. In a complete waveform there is a crest and a trough having values $1A$ and $ - 1A$ respectively. So the change in current is $\left\{ {1 - \left( { - 1} \right)} \right\} = 2A$
The time difference between the crest and the trough of the current waveform is half of its total time period.
Substituting the values we get,
${V_2} = 0.5 \times \dfrac{2}{{\dfrac{1}{{2 \times 50}}}} = 100V$
Therefore, the crest voltage induced in the secondary is $100V$
Hence, the correct answer is C.
Note In a transformer, for low frequency operation laminated iron core is used but for radio frequency operation, to minimize eddy current while maintaining high flux density ferrite core is used.
Formulas used
$t = \dfrac{1}{f}$ where $t$ is the time period and $f$ is the frequency of the waveform.
${V_2} = M\dfrac{{d{i_1}}}{{dt}}$ where $M$is the mutual inductance, $d{i_1}$ is the change in current and $dt$ is the time difference.
Complete step by step answer
A transformer is an electrical device which can transfer electrical energy from one circuit to another. It usually consists of two windings with mutual inductance. One of the windings is called the primary while the other is called secondary. AC source is connected to the primary and a load to the secondary. The transformer can step up or step down the generator voltage.
The frequency of the given current is $50Hz$ so its time period is given by,
$t = \dfrac{1}{f} = \dfrac{1}{{50}}$$s$
In a transistor, the source can deliver power to the load via the magnetic coupling between the windings.
So, by formula,
${V_2} = M\dfrac{{d{i_1}}}{{dt}}$ where $M$is the mutual inductance, $d{i_1}$ is the change in current and $dt$ is the time difference.
We use this formula because a voltage is induced in the secondary coils of the transformer due to the change in current in the primary.
Now, the crest current is given as $1A$. In a complete waveform there is a crest and a trough having values $1A$ and $ - 1A$ respectively. So the change in current is $\left\{ {1 - \left( { - 1} \right)} \right\} = 2A$
The time difference between the crest and the trough of the current waveform is half of its total time period.
Substituting the values we get,
${V_2} = 0.5 \times \dfrac{2}{{\dfrac{1}{{2 \times 50}}}} = 100V$
Therefore, the crest voltage induced in the secondary is $100V$
Hence, the correct answer is C.
Note In a transformer, for low frequency operation laminated iron core is used but for radio frequency operation, to minimize eddy current while maintaining high flux density ferrite core is used.
Recently Updated Pages
JEE Main 2021 July 25 Shift 1 Question Paper with Answer Key

JEE Main 2021 July 22 Shift 2 Question Paper with Answer Key

JEE Atomic Structure and Chemical Bonding important Concepts and Tips

JEE Amino Acids and Peptides Important Concepts and Tips for Exam Preparation

JEE Electricity and Magnetism Important Concepts and Tips for Exam Preparation

Chemical Properties of Hydrogen - Important Concepts for JEE Exam Preparation

Trending doubts
A proton accelerated by a potential difference of 500 class 12 physics JEE_Main

A 50HzAC current of crest value of 1A flows through class 12 physics JEE_Main

The force of interaction of two dipoles if the two class 12 physics JEE_Main

Three sides of a square of side l are occupied by positive class 12 physics JEE_Main

JEE Main Response Sheet 2025 Released – Download Links, and Check Latest Updates

How Many Students Will Appear in JEE Main 2025?

Other Pages
JEE Main Exam Marking Scheme: Detailed Breakdown of Marks and Negative Marking

JEE Main Participating Colleges 2024 - A Complete List of Top Colleges

Learn About Angle Of Deviation In Prism: JEE Main Physics 2025

JEE Advanced Study Plan for 2025: Tips, Timetable, and Strategy

Collision - Important Concepts and Tips for JEE

If a wire of resistance R is stretched to double of class 12 physics JEE_Main
