Courses
Courses for Kids
Free study material
Offline Centres
More
Store Icon
Store

Van't Hoff Factor

Reviewed by:
ffImage
hightlight icon
highlight icon
highlight icon
share icon
copy icon
SearchIcon

Jacobus Henricus Van't Hoff


Some chemical substances when used as solutes undergo dissociation or association in solution. This causes a change in their molar Mass and various Colligative properties. This can be explained by Van't Hoff Factor. It was named after Dutch physical Chemist Jacobus Henricus Van't Hoff, Jr. He was the first winner of the Nobel Prize in Chemistry. 


(Image Will be uploaded soon)


To have a better and clear understanding of the Van't Hoff Factor, you need to understand the Colligative properties of solutions and Abnormal molar Mass first. So, let’s start with a brief explanation of what are Colligative properties and what is Abnormal molar Mass. 


What is Abnormal Molar Mass? 

Molar Mass can be defined as the Mass of a sample of that compound divided by the amount of substance in that sample, measured in Moles. 


When the molecular mass of a solute is calculated from the Colligative properties of solution (In which that solute has been dissolved), are sometimes found to differ from experimentally obtained values. This value is called the Abnormal molar Mass of that solute. The reason behind this is that some solutes when dissolved in solutions get dissociated into ions or associate into larger Molecules. 


What are Colligative Properties? 

In Chemistry, Colligative properties are those properties of solutions that depend on the ratio of the number of solute particles to the number of solvent Molecules in a solution and not on the nature of the chemical species present. Colligative properties include following four main properties –

  • Relative lowering of vapor pressure (depends on mole fraction of solute)

  • Elevation of boiling point

  • Depression of freezing point 

  • Osmotic pressure 


Van't Hoff Factor

Van't Hoff Factor is the measure of the effect of solute on various Colligative properties of solutions. Colligative properties such as relative lowering in vapor pressure, osmotic pressure, boiling point elevation and freezing point depression are proportional to the quantity of solute in the solution. Van't Hoff Factor is the ratio between the actual concentration of particles produced when the substance is dissolved, and the concentration of a substance as calculated from its Mass. It is denoted by ‘i’. 


If we take one liter of water and dissolve 1mole of sugar in it then its Colligative properties will not change but if dissolve 1 mole of salt in 1L of water then its Colligative properties will change as 1 mole of NaCl will dissociate into 1 mole Na+ and 1 mole Cl-. So, for NaCl solutions theoretical and experimental data will differ. In this situation to rectify or to measure the change in Colligative properties of the solution, we need the Van't Hoff Factor. Various formulae of calculating Van't Hoff Factor are given below –

\[ i = \frac{\text{Observed colligative property}}{\text{Normal or theatrical colligative property}}\]

\[ i = \frac{\text{Normal molar mass}}{\text{Observed molar mass} }\]

\[i = \frac{\text{Actual number of particles}}{\text{Expected Actual number of particles}}\]

Van't Hoff Factor for Dissociated Solutes – let’s understand it by using NaCl solution. 1 mole of Sodium chloride dissolved in 1L water and gives 1 mole of sodium and 1 mole of chloride ions. At time 0, when dissociation did not start –

                             NaCl                  🡪               Na+           +            Cl-

At t=0                  1 mole                                  0 mole                 0 mole 

At time t, when dissociation is completed –

                             NaCl                  🡪               Na+           +            Cl-

At t=t                  0 mole                                 1 mole                  1 mole 

                                              

\[ i = \frac{\text{Observed colligative property}}{\text{Normal or theatrical colligative property}}\]

On keeping the values from equation in the above formula –                                                                                    

\[ i = \frac{2}{1} = 1\]

For dissociation, in absence of association, the value of i is greater than 1. 

In Case of Dissociation – the quantity of solute increases,the  Colligative property increases, molar Mass of solute decreases. 

Van't Hoff Factor for Associated Solutes – let’s understand it by using the example of the solution of acetic acid in benzene. Dimerization of acetic acid takes place in benzene. So, if we take 2 Molecules of acetic acid in benzene then it becomes 1. 

\[ 2CH_{3}COOH + Benzene \rightarrow  (CH_{3}COOH)_{2} \]

Thus, at t=0, when association did not start, 2 moles of acetic acid is present. While at time t, when the association is completed, 1 mole of acetic acid is present. As we know Van't Hoff Factor –

\[ i = \frac{\text{Observed colligative property}}{\text{Normal or theatrical colligative property}}\]

On keeping the values -

\[ i = \frac{1}{2} = 0.5\]

Thus, in case of association value of i is smaller than one, the quantity of solute decreases, Colligative property decreases, Molar Mass of solute increases.

Van't Hoff Factor for Associated Solutes and dissociated solutes can be summarized in tabulated form as follows –



Quantity of Solute

Colligative Property

Molar mass of Solute

Van’t Hoff Factor (i)

Dissociation

Increases

Increases

Decreases

i > 1

Association

Decreases

Decreases

Increases

i < 1


Physical Significance of ‘i’

The value of 'i' determines the physical concentration of solute particles in a solution.


It is found that if the solute particles are associated in a solution, ‘i’ happens to be less than 1. We can understand this through carboxylic acids such as acetic acid (ethanoic acid) or benzoic acid which are known to form dimers in benzene, which divides the number of solute particles by half the number of acid Molecules.


However, if the solute particles dissociate in the solution, ‘i’ will be greater than 1 (e.g. salts dissolved in water such as sodium chloride in water, potassium chloride in water, magnesium chloride in water, etc.).


And in cases where the solute particles neither dissociate nor associate in a solution, ‘i’ equals 1 (e.g. glucose in water).


The value of i can be obtained simply from the actual number of particles in solution after dissociation divided by the number of formula units initially dissolved in solution. In other words, the number of particles per formula unit of the solute when a solution is dilute is 'i' value for the solution.


This quantity can be related to the osmotic coefficient g by the relation: i= ng


Contributions of Chemist Van't Hoff:

In Organic Chemistry: Van 't Hoff first gained popularity in the field of organic Chemistry. In 1874, he explained the phenomenon of optical activity in solutions by emphasizing that the chemical bonds between carbon atoms and the neighboring atoms were directed towards the corners of a regular tetrahedron. The resultant three-dimensional structure that was created would explain the isomers found in nature. He shares the credit for this work in stereoChemistry with the French chemist Joseph Le Bel, who independently came up with the same idea.  Van 't Hoff later published his theory, which today is regarded as the foundation of stereoChemistry.


In Physical Chemistry: In 1884, Van 't Hoff went on to publish his works on a different aspect of Chemistry, the chemical kinetics, in the paper titled "Studies in Chemical Dynamics". Through his research, he described a novel method for determining the order of a reaction using graphics. He also applied the laws of thermodynamics to chemical Equilibrium attained in solutions and introduced the modern age concept of chemical affinity. In 1886, he worked on the  similarity between the behaviour of dilute solutions and gases. He also contributed to Svante Arrhenius's theory of dissociation of electrolytes and provided experimental evidence for the Arrhenius equation. Finally, in the year 1901, he received the first Nobel Prize in Chemistry for his work with dilute solutions. His work aptly demonstrated that very dilute solutions follow mathematical laws that closely resemble the laws describing the behavior of gases.


This was a brief on Van't Hoff Factor, if you are looking for detailed study notes on this topic or other topics of Chemistry then log on to the Vedantu website or download Vedantu learning app. By doing so, you will get access to detailed study notes, NCERT Solutions, revision notes and much more. 

FAQs on Van't Hoff Factor

1. What is the Van't Hoff factor (i)?

The Van't Hoff factor, denoted by the symbol 'i', is a measure that quantifies the effect of a solute on a solution's colligative properties. It represents the ratio of the actual number of particles in a solution after dissociation or association to the number of formula units initially dissolved. It is used to correct the theoretical formulas for colligative properties when dealing with solutes that are electrolytes.

2. Why is the Van't Hoff factor needed in the study of colligative properties?

The Van't Hoff factor is essential because the standard formulas for colligative properties (like boiling point elevation and freezing point depression) assume the solute does not change its form in the solvent. However, many substances, known as electrolytes, either dissociate into multiple ions or associate into larger molecules. This alters the total number of solute particles, which directly impacts the colligative properties. The factor 'i' modifies the formulas to account for this change and provide accurate, observed values.

3. How is the Van't Hoff factor calculated?

The Van't Hoff factor (i) can be calculated using several relationships depending on the experimental data available:

  • From Colligative Properties: i = (Observed Colligative Property) / (Calculated or Theoretical Colligative Property)
  • From Molar Mass: i = (Normal or Theoretical Molar Mass) / (Abnormal or Observed Molar Mass)
  • From Particle Count: i = (Total moles of particles after association/dissociation) / (Moles of formula units dissolved initially)

4. What does it mean when the Van't Hoff factor (i) is greater than 1?

When the Van't Hoff factor (i) is greater than 1, it signifies that the solute undergoes dissociation in the solution. This means that one formula unit of the solute breaks down into two or more smaller particles (ions). For instance, when NaCl dissolves in water, it dissociates into one Na⁺ ion and one Cl⁻ ion, theoretically doubling the number of solute particles and giving a Van't Hoff factor of 2.

5. How does the Van't Hoff factor explain the concept of abnormal molar mass?

Abnormal molar mass is the experimentally determined molar mass of a solute that differs from its normal, theoretical value. The Van't Hoff factor (i) directly links these two values by the formula: i = Normal Molar Mass / Abnormal Molar Mass.

  • For dissociation (i > 1), the number of particles increases, causing a higher observed colligative effect and thus a lower (abnormal) molar mass.
  • For association (i < 1), the number of particles decreases, causing a lower observed colligative effect and a higher (abnormal) molar mass.

6. Compare the Van't Hoff factor for a solute that associates versus one that dissociates. Provide an example for each.

The primary difference lies in how the solute behaves in the solvent, which leads to opposite effects on the Van't Hoff factor (i).

  • Dissociation: The solute breaks into multiple ions, increasing the total number of particles. This results in a Van't Hoff factor greater than 1 (i > 1). For example, MgCl₂ dissociates into one Mg²⁺ ion and two Cl⁻ ions in water, so its theoretical 'i' value is 3.
  • Association: Multiple solute molecules combine to form a single, larger entity. This decreases the effective number of particles, resulting in a Van't Hoff factor less than 1 (i < 1). For example, acetic acid (CH₃COOH) forms dimers in benzene, meaning two molecules combine into one, making its theoretical 'i' value 0.5.

7. For which types of solutes is the Van't Hoff factor equal to 1, and why?

The Van't Hoff factor (i) is equal to 1 for non-electrolyte solutes. These are substances that do not undergo any change like association or dissociation when dissolved in a solvent. Because they exist as whole, neutral molecules in the solution, the number of solute particles is exactly equal to the number of formula units initially added. Common examples include glucose, sucrose, and urea when dissolved in water.

8. Can the experimental value of the Van't Hoff factor differ from its theoretical value? If so, why?

Yes, the experimentally measured value of 'i' often differs from its theoretical integer value (e.g., being slightly less than 2 for NaCl). This discrepancy arises because dissociation or association may not be 100% complete. The actual extent of this process is quantified by the degree of dissociation (α) or degree of association. Additionally, in concentrated solutions, strong inter-ionic attractions can limit the independent movement of ions, causing the observed 'i' to be lower than the theoretical maximum.