

Introduction of Noble Gases
Any of the seven chemical elements that make up Group 18 (VIIIa) of the periodic table are considered noble gases. The elements are helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), radon (Rn), and oganesson (Og). Noble gases are colourless, odourless, and tasteless nonflammable gases. Because it was assumed for decades after their discovery that they couldn't link to other atoms and that their atoms couldn't combine with those of other elements to produce chemical compounds, they were allocated to Group 0 in the periodic table. Group 18 is a better classification based on their electrical properties and the discovery that some of them do form compounds.
Noble Gases and Their Applications
Inert atmospheres, which are commonly used for arc welding, specimen protection, and chemical reaction prevention, are created using noble gases. Neon lights and krypton headlights, as well as lasers, contain the elements. Superconducting magnets are cooled with helium, which is also used in balloons and deep-sea diving air tanks.
The Noble Gases' Sources
Air contains neon, argon, krypton and xenon, which are obtained by liquefaction and fractional distillation. Cryogenic separation of natural gas is the most important source of helium. Radioactive decay of heavy elements such as radium, thorium, and uranium produces radon, a radioactive noble gas. Element 118 is a radioactive element produced by the acceleration of particles and their impact on the target. Noble gas alien sources may be discovered in the future. Large planets have more helium deposits than Earth.
Noble Gas Properties: Key Takeaways
On the periodic table, noble gases belong to group 18, which is the right-hand column of elements.
Helium, neon, argon, krypton, xenon, radon, and oganesson are the seven noble gases.
The least reactive chemical elements are noble gases. Because the atoms have a full valence electron shell, they are practically inert and have minimal tendency to absorb or contribute electrons to form chemical bonds.
Excimer lasers, which are based on short-lived electrically excited molecules known as excimers, also use noble gases. Noble gas dimers like Ar2, Kr2, or Xe2 are employed in lasers, but more typically, the noble gas is coupled with a halogen in excimers like ArF, KrF, XeF, or XeCl. These lasers produce ultraviolet light, which enables high-precision imaging due to its short wavelength (193 nm for ArF and 248 nm for KrF). Excimer lasers have a wide range of industrial, medical, and scientific uses. They are used in integrated circuit production for microlithography and microfabrication, as well as laser surgery, such as laser angioplasty and eye surgery.
The noble gases are group 18 elements of the periodic table. Atoms of these elements have completely filled valence electron shells, making them relatively inert, colourless, odourless, monatomic gases at room temperature and pressure.
Under the normal conditions of temperature and pressure, all the noble gases exist in the gaseous phase. The term “noble gas” is derived from a translation of the German word Edelgas, which means “noble gas”.
German chemist Hugo Erdmann termed this phrase in 1898. Like a nobleman considers it undignified to associate with common people, noble gases tend not to react with other elements. Other names for noble gases are rare gases, inert gases, and aerogenes.
The Names of the Noble Gases are:
Helium (He)
Neon (Ne)
Argon (Ar)
Krypton (Kr)
Xenon (Xe)
Radon (Rn)
Noble Gas Properties
They are known to have extremely low chemical reactivity. This is because all the inert gases have stable electron configurations and they do not form molecules easily and are mostly found as monatomic gases. The general noble gas configuration is ns2 np6. In this topic we have discussed the definition of noble gases definition, Now let’s discuss noble gases properties and the atomic number of noble gases.
Helium (He):
Helium is the first chemical element of group 18 and is denoted by the symbol He. It is the first lightest noble gas and is known to possess the lowest boiling point. It is the second lightest element which is colourless, odourless, and tasteless. The atomic number of helium is 2. It is non-toxic in small concentrations, The electronic configuration of helium is 1s2. So, It has a total of 2 electrons in its valence shell. Helium cannot be solidified by sufficient cooling at normal atmospheric pressure, so it is necessary to apply pressure of 25 atmospheres at a temperature of −272 °C to convert it into a solid form.
This gas constitutes about 23 percent of the mass of the universe and is the second in abundance after hydrogen in the cosmos. Helium is mainly concentrated in stars, where it is synthesized from hydrogen by the nuclear fusion reaction. This gas is used as an inert-gas atmosphere for welding metals such as aluminium and is also used in rocket propulsion.
Atomic Number: 2
Mass Number: 4
Melting point: -272 °C
Boiling Point: -268.9 °C
Density: 0.178 X 10 -3 g/cm3 at 20 °C
Neon (Ne):
Neon is a second chemical element of group 18 and is denoted by the symbol Ne. The atomic number of neon is 10. Neon exists as a colourless monoatomic gas. This gas does not possess any colour, odour, taste and is lighter than air. The electronic configuration of Neon is HeHe 2s22p6. It is used commonly in fluorescent lamps and electric signs. This gas occurs in minute quantities in Earth’s atmosphere and is trapped within the rocks of Earth’s crust. This element is more abundant in the cosmos as compared to Earth’s surface.
Atomic Number: 10
Mass Number: 20
Melting point: -248.4 °C
Boiling Point: -246 °C
Density: 0.9 g/L
Argon (Ar):
Argon is the third chemical element of group 18 in the periodic table with an atomic number of 18. The element is denoted by the symbol Ar. It is a colourless, odourless, and tasteless gas. The electronic configuration of argon is NeNe3s23p6. This element has a total of 8 electrons in its valence shell and hence it is non-reactive.
Atomic Number: 18
Mass Number: 39.948
Melting point: -189.4 °C
Boiling Point: -185.8 °C
Density: 1.784 g/L
Krypton (Kr):
Krypton is the fourth chemical element of group 18 with an atomic number equal to 36. This element is denoted by the symbol Kr. It is about three times heavier compared to air. Krypton is a colourless, odourless, tasteless, and monatomic gas. The electron configuration of krypton is written as ArAr3d104s24p6.
Atomic Number: 36
Mass Number: 83.798
Melting point: -157.4 °C
Boiling Point: -153.4 °C
Density: 1.784 g/L
Xenon(Xe):
Xenon is the fifth noble gas with an atomic number of 54. The symbol ‘Xe’ is used to denote xenon.
It is 4.5 times heavier than air, It is a colourless, odourless, and tasteless gas. The term xenon was derived from the Greek word Xenos, meaning “strange” or “foreign.”
Atomic Number: 54
Mass Number: 131.293
Melting point: -157.4 °C
Boiling Point: -108.1 °C
Density: 5.761 kg/m3
Radon(Rn):
Radon is a sixth noble gas with an atomic number equal to 86. It is a heavy radioactive gas generated by the radioactive decay of radium. This is a colourless gas that is 7.5 times heavier compared to air and 100 times heavier than hydrogen.
Atomic Number: 86
Mass Number: 222.01
Melting point: -71 °C
Boiling Point: -61.7 °C
Density: 9.73 g/litre
Here, we have discussed all the noble gas elements.
FAQs on What are Noble Gases?
1. What is the definition of a noble gas?
A noble gas is an element belonging to Group 18 of the periodic table. These elements are characterized as being colourless, odourless, monatomic gases at standard conditions. Their most important feature is their low chemical reactivity due to having a complete or full outer shell of electrons.
2. Which elements are classified as noble gases and where are they in the periodic table?
The noble gases are located in Group 18, the rightmost column of the periodic table. The elements in this group are:
- Helium (He)
- Neon (Ne)
- Argon (Ar)
- Krypton (Kr)
- Xenon (Xe)
- Radon (Rn)
- Oganesson (Og)
3. Why are noble gases so named, and what does it imply about their reactivity?
The term 'noble gas' is an analogy to the nobility, who historically were considered to be above interacting with common people. Similarly, these elements are so stable and 'aloof' that they do not readily react or form bonds with other, more 'common' elements. This name directly refers to their very low chemical reactivity.
4. What is the general electron configuration for noble gases and why is it important?
The general valence electron configuration for noble gases (except for Helium) is ns²np⁶. This configuration signifies a completely filled outermost electron shell, which is an extremely stable state. This stability is the primary reason why noble gases have high ionization energies and do not easily gain, lose, or share electrons, making them chemically inert. Helium's configuration is 1s², which also represents a completely filled shell.
5. What are the key physical properties common to all noble gases?
Noble gases share several distinct physical properties. They are all:
- Monatomic, meaning they exist as single, unbonded atoms.
- Colourless, odourless, and tasteless under standard conditions.
- Non-flammable gases.
- Possess very low boiling and melting points.
6. Why are noble gases chemically unreactive?
Noble gases are chemically unreactive due to their stable electron configuration. Their outermost electron shell is completely full, meaning they have no tendency to lose, gain, or share electrons to form chemical bonds with other elements. This stability is also reflected in their very high ionization energies and near-zero electron affinities.
7. Are noble gases always inert, or can they form chemical compounds?
While they are known as 'inert gases', they are not completely unreactive. The larger noble gases, such as xenon and krypton, can be forced to form chemical compounds under specific conditions, typically with highly electronegative elements like fluorine and oxygen. For example, compounds like xenon hexafluoride (XeF₆) have been synthesized. Helium and Neon, however, remain essentially inert.
8. What are some important real-world applications of noble gases?
Noble gases have various important applications based on their unique properties:
- Helium (He): Used in weather balloons, blimps, and as a cooling agent (cryogenics) for superconducting magnets in MRI machines.
- Neon (Ne): Famously used in brightly coloured advertising signs ("neon lights").
- Argon (Ar): Provides an inert atmosphere for welding to prevent metal oxidation and is used to fill incandescent light bulbs.
- Krypton (Kr) and Xenon (Xe): Used in high-intensity lamps, photographic flashes, and certain types of lasers.
9. How does the inertness of Argon make it suitable for use in light bulbs and welding?
The chemical inertness of Argon is its most valuable property for these applications. In arc welding, Argon gas shields the hot metal from oxygen and nitrogen in the air, preventing the formation of brittle oxides and nitrides that would weaken the weld. In incandescent light bulbs, it prevents the hot tungsten filament from quickly burning out and evaporating by displacing the reactive oxygen.
10. How do physical properties like boiling point change as you go down the noble gas group?
As you move down Group 18 from Helium to Radon, the boiling point steadily increases. This is because the number of electrons in each atom increases, leading to stronger temporary forces of attraction between the atoms, known as London dispersion forces. More energy is required to overcome these stronger inter-atomic forces, resulting in higher boiling points for the heavier noble gases.

















