

Stability Solution of Equations
In mathematics, a stability solution of equations refers to a situation in which a minor disturbance in a system does not have a significant impact on the system. A function f(x) is said to be stable in terms of the solution of a differential equation if every other solution starts fairly close to it. When x = 0, it stays similar to it for subsequent x values. As x increases, the difference between the solutions reaches zero, and the solution is said to be asymptotically stable. A solution is said to be unstable if it lacks any of these properties.
In this article, we will discuss the stability of equilibrium solutions and conditions for asymptotically stable differential equations.
Stability of Equilibrium Solutions
The behaviour of integral curves near an equilibrium solution is used to classify its stability – they represent the graphs of specific solutions satisfying initial conditions whose initial values,y0, vary only slightly from the equilibrium value.
The equilibrium solution is said to be stable, or asymptotically stable if the nearby integral curves all converge towards an equilibrium solution as t increases. The long-term behaviour of such a solution is unaffected by minor (or often large) changes in its initial state.
When the integral curves near an equilibrium solution all diverge away from it as t increases, the equilibrium solution is said to be unstable. Such a solution is highly sensitive to even minor changes in its initial state, as shown by the previous example, where the smallest change in initial value results in completely different behaviours (in both long- and short-term)
As a result, the solution y = 0 is an unstable equilibrium solution in the logistic equation example, whereas y = K is an (asymptotically) stable equilibrium solution.
Plotting y'=f(y)versus y is an alternative graphical form. This graph is easier to draw, but it contains the same amount of information as the direction field. It's close to calculus's First Derivative Test for local extrema. Any interval where f(y) > 0 will rise, as indicated by a rightward arrow (they are separated by equilibrium solutions / critical points, which are the graph's horizontal intercepts). (As we know y is the horizontal axis in this map, and its coordinates increase from left to right, from (- to +). Similarly, on any interval where f(y) < 0, y is decreasing.
This fact will be indicated by a leftward arrow. To summarise: f(y)>0, y increases, resulting in a rightward arrow; f(y)0, y decreases, resulting in a leftward arrow. The following is how the outcome can be interpreted: If y=c is an equilibrium solution with f(y)=0
The equilibrium solution y=c is unstable if f(y)0 is to the left of c and f(y)>0 is to the right of c. (The arrows on both sides are visually moving away from c.)
The equilibrium solution y=c is asymptotically stable if f(y)>0 on the left of c and f(y)0 on the right of c. (The arrows on both sides are visually heading towards c.)
A leftward arrow indicates that y is decreasing as t increases. It refers to the direction field's downward-sloping arrows. A rightward arrow indicates that y grows as t grows. On the direction field, it corresponds to upward-sloping arrows.
Asymptotically Stable Differential Equations
Stable solution of differential equation, for example, the solution \[y = ce^{-x}\] of the equation \[y = -y\]is asymptotically stable, because the difference of any two solutions \[c_{1}e^{-x}\] and \[c_{2}e^{-x}\] is \[(c_{1} - c_{2})e^{-x}\]which always approaches zero as x increases.
Stable Semistable Unstable Differential Equations
If there are other solutions on both sides of an equilibrium equation, it is said to be asymptotically stable. If there are other solutions that approach this equilibrium solution on one side of the equilibrium solution, and other solutions diverge from this equilibrium solution on the other side of the equilibrium solution, the equilibrium solution is said to be Semi-Stable. If other solutions diverge from this equilibrium solution on both sides of the equilibrium solution, it is said to be unstable.
If \[\frac{dy}{dx} = f(t,y)\]is a differential equation, then the equilibrium solutions can be obtained by setting \[\frac{dy}{dx} = 0\]. For example, if \[\frac{dy}{dx} = y(y+2)\] then the equilibrium solutions can be obtained by solving y(y+2)=0 for y. We hence see that y=0 and y=-2 are the equilibrium solution.
The following image is the slope field of the differential equation \[\frac{dy}{dx} = (y-1)^{2} (y-2) (y-3)\] which has three equilibrium solutions y=1,y=2 and y=3.
(Image will be uploaded soon)
The equilibrium solution y=1 is green and is a semi-stable equilibrium solution.
The equilibrium solution y=2 is yellow and is an asymptotically stable equilibrium solution.
The equilibrium solution y=3 is a red colour, indicating that it is an unstable equilibrium solution.
FAQs on Stability Solutions of Differential Equations
1. What does it mean for a solution of a differential equation to be stable?
A solution of a differential equation is considered stable if small changes in initial conditions result in solutions that remain close to the original solution for all subsequent values. In other words, a stable solution resists the amplifying effects of minor disturbances, maintaining system behavior consistent with the original path.
2. How can you determine whether an equilibrium solution is asymptotically stable?
To determine if an equilibrium solution is asymptotically stable, analyze the sign of f(y) (where dy/dx=f(y)) on either side of the equilibrium point y=c:
- If f(y) > 0 to the left of c and f(y) < 0 to the right, all nearby solutions move towards c, indicating asymptotic stability.
- If the opposite signs occur or both sides move away, the point is unstable.
3. What is the difference between stable, unstable, and semi-stable equilibrium solutions in differential equations?
The difference lies in how solutions behave near the equilibrium point:
- Stable: Nearby solutions stay close to equilibrium but may not converge at infinity.
- Asymptotically stable: Solutions not only stay close but also approach equilibrium as time increases.
- Semi-stable: Solutions on one side approach equilibrium, while those on the other side diverge.
- Unstable: Any small deviation leads solutions away from equilibrium over time.
4. Why is the direction field important in analyzing the stability of differential equations?
The direction field visually represents the behavior of solutions around equilibrium points. By observing arrows or slopes at each point, students can quickly identify if solutions move toward, away from, or partially toward/away from equilibrium, helping classify stability without explicit solution formulas.
5. How do you find equilibrium solutions for first-order differential equations?
Equilibrium solutions are found by setting the derivative to zero: dy/dx = f(y) = 0. Solve for y to get the equilibrium points. For example, in dy/dx = y(y+2), set y(y+2)=0, giving equilibrium values at y=0 and y=–2.
6. What are common misconceptions about stability in differential equations?
Common misconceptions include:
- Assuming all equilibrium points are stable by default.
- Believing only negative exponents (like e–x) lead to stability—some nonlinear equations can be stable even without exponentials.
- Ignoring the role of initial condition proximity in determining stable behavior.
7. In practical situations, why is understanding stability crucial when modeling with differential equations?
Understanding stability ensures that mathematical models accurately reflect real-world systems that can withstand minor disturbances—such as population models, chemical reactions, or physical systems—predicting whether they return to equilibrium or spiral out of control after changes.
8. Can the stability of solutions change if you modify the parameters of the differential equation?
Yes, stability can change when equation parameters are altered. For example, in a logistic population model, changing the growth rate or carrying capacity may shift stable and unstable equilibrium points, impacting long-term system behavior. Always analyze stability after parameter modification.
9. How does the concept of stability solutions of differential equations relate to CBSE Class 12 exam questions?
Questions about stability solutions of differential equations often require you to analyze equilibrium, determine stability types, and interpret direction fields as outlined in the CBSE Class 12 Maths syllabus for 2025–26. Mastery of these concepts is essential for performing well in board exams and solving related application problems.

















